Home  /  Manpower Supply  /  Welders

Welder Manpower Supply in the UAE

Structural, pipe and fabrication welders for construction sites, MEP pipework, workshops and oil field jobs — tested before they reach your site and briefed on hot-work rules.

Inspection

Welders who pass your inspection the first time

A rejected weld costs twice: once to grind it out, and again to redo it while the next trade waits. We supply welders who are matched to the process, the material and the position your job needs, so the joint that goes to your inspector is one they can sign off.

Welder manpower supply – Riggers in PPE guiding a concrete block lifted with chain slings inside a building under construction
Lifting and placing steel and concrete elements on site.

In practice

What our welders do

  • Arc (stick / SMAW), MIG/MAG (GMAW) and TIG (GTAW) welding
  • Mild steel, stainless steel and aluminium, as the job requires
  • Structural steel: beams, columns, base plates, stairs, handrails, canopies
  • Pipework: process, fire-fighting, chilled water and drainage lines
  • Fabrication in workshops: frames, supports, brackets and skids
  • Fit-up, tack, root, fill and cap; grinding and finishing to drawings

Choosing right

Structural, pipe, TIG, 6G — which welder do you need?

  • Structural welder — fillet and groove welds on steel frames, usually arc or MIG
  • Pipe welder — butt welds on pipe in fixed positions; the hardest to qualify for
  • TIG welder — clean, precise welds on stainless and aluminium, thin wall pipe
  • 6G welder — qualified on pipe fixed at 45°, the test position that covers most others
  • Welder-fabricator — reads drawings, cuts, fits and welds; common in workshops

Tell us the process, material, thickness and position. If your project needs welders qualified to a specific code or WPS, say so in the request and we will match it.

Skills & checks

How we check welders

  • Reads drawings, weld symbols and the WPS if you provide one
  • Knows fit-up tolerances, preheat where specified, and interpass cleaning
  • Understands hot-work permits, fire watch and screens around the work
  • Valid work permit and Emirates ID

Safety

Hot-work safety on site

  • Hot-work permit — welding only starts once your permit is issued for that area
  • Fire watch — combustibles cleared or covered, extinguisher at the point of work, watch kept after the work stops
  • Screens and PPE — welding screens to protect others, helmet with the correct shade, leather gloves, FR clothing
  • Ventilation — fume extraction or ventilation in enclosed spaces; confined-space rules where they apply
  • Heat — no direct-sun work 12:30–3:00 PM from 15 June to 15 September, and water, shade and rest outside those hours. Source: MOHRE

Coverage

Where our welders work

Steel structures and warehouses · MEP pipework in towers and malls · Fabrication workshops in Jebel Ali, Al Quoz, Sharjah and Ajman industrial areas · Oil field and shutdown work · Marine and port facilities · Fujairah and the east coast

Manpower supply

Welders and gas cutters together

Most steel and pipe jobs need both. Gas cutters prepare the steel, cut openings and remove old sections; welders join it. Booking them as one crew keeps the work flowing and puts one supervisor in charge of hot work. Gas cutter manpower supply

Pay & salaries

What do welders earn in the UAE?

Pay depends on process, certification and experience. GulfTalent puts average monthly pay for welders in the UAE at around AED 3,000, with welder-fabricators around AED 3,500. Source: GulfTalent, 2025 — indicative only A supply rate is a different number: it includes visa, insurance, accommodation, transport and PPE. Manpower Supply Rates in the UAE (2026) →

FAQs

Frequently asked questions

Can’t find your answer? Contact our team or WhatsApp us.

Do you supply certified welders?

Yes. We match welders to the process and position your job needs, and test them before deployment. Tell us if your project requires a specific qualification.

Can you supply 6G pipe welders?

Yes, for pipework where full-position qualification is required. Give us the material and pipe size with your request.

Do your welders do TIG on stainless steel?

Yes. TIG welders for stainless and aluminium are available on request.

Do you supply welders for oil field and shutdown work?

Yes, alongside gas cutters, riggers’ helpers and scaffolders for the same job.

Can welders work night shifts?

Yes. Hot work at night still needs a permit, lighting and a fire watch, which we plan with your site team.

Do you supply welders outside Dubai?

Yes, from Jebel Ali to Fujairah and every emirate of the UAE.

Coverage

Where we supply welders

Welder manpower supply is available for sites in every emirate, on GFTS visas with WPS payroll. Each emirate page covers the areas we work in.

Welder manpower supply: Scaffolding and steel frame structure on a GFTS project site in the UAE
Welder manpower supply for steel structures like this scaffold-braced frame.
Welder manpower supply: Riggers in PPE guiding a concrete block lifted with chain slings inside a building under construction
Welder manpower supply works next to riggers on lifts and fabrication.

Official sources: Dubai Media Office: MoHRE midday work ban 2026 · MoHRE: Wages Protection System

Looking for work rather than workers? Send your CV to gftsems@gmail.com. This page is for companies hiring supplied manpower.

Business enquiries

Send the material, process and position — we’ll match the welder.

Need welder manpower supply for steel, pipework or oil field work? Welder manpower supply is booked by the day, month or project. Tell us the trade, headcount, location and start date. We’ll come back with a clear, itemised quotation.

WhatsApp