Home  /  Manpower Supply  /  Gas Cutters

Gas Cutter Manpower Supply in the UAE

Oxy-fuel gas cutters for steel cutting, dismantling, demolition, scrap and fabrication — workers who handle cylinders, hoses and torches safely and cut clean to the line.

Manpower supply

Cutting work done fast, without starting a fire

Gas cutting is quick, but it throws sparks and slag a long way. A careless cutter can damage finished work, set fire to packaging or insulation, or drop a cut section on someone below. We supply gas cutters who plan the cut, protect the area and keep the cylinders under control.

Gas cutter – GFTS worker breaking out a concrete column during dismantling works in the UAE
Dismantling and break-out works on a UAE site.

In practice

What our gas cutters do

  • Oxy-acetylene and oxy-propane cutting of mild steel plate, sections and pipe
  • Cutting to marked lines for fabrication and fit-up
  • Bevelling plate and pipe ends for welding
  • Dismantling steel structures, tanks, pipe racks and old plant
  • Demolition cutting and scrap sizing
  • Gouging and removing temporary attachments, cleats and lugs

In practice

Gas cutter or welder — what’s the difference?

A gas cutter uses an oxygen and fuel-gas torch to cut steel apart. A welder joins steel together. Many experienced workers can do some of both, but on a busy job it pays to keep them as separate roles: the cutter prepares and removes steel, the welder joins it. Welder manpower supply

Skills & checks

How we check gas cutters

  • Sets up and lights the torch correctly, adjusts the flame for the thickness
  • Cuts straight and square to a marked line with minimal slag
  • Checks hoses, regulators and flashback arrestors before starting
  • Stores and moves cylinders upright and secured
  • Valid work permit and Emirates ID

Safety

Safety controls for gas cutting

  • Hot-work permit — no cutting until your permit is issued for that area
  • Cylinders — kept upright and chained, oxygen away from fuel gas, valves closed when not in use
  • Flashback arrestors — fitted on both oxygen and fuel lines; hoses checked for leaks and damage
  • Sparks and falling sections — area below barricaded, combustibles cleared, fire watch kept during and after cutting
  • PPE — shaded goggles or face shield, leather gloves, FR clothing, safety boots
  • Heat — no direct-sun work 12:30–3:00 PM from 15 June to 15 September. Source: MOHRE

Coverage

Where our gas cutters work

Construction sites and steel structures · Dismantling and demolition jobs · Oil field and plant shutdowns · Fabrication yards in Jebel Ali, Mussafah, Sharjah and Ajman · Scrap yards · Port and marine work in Fujairah and Khalifa Port

Pay & salaries

What do gas cutters earn in the UAE?

Pay varies with experience and whether the worker also welds. A supply rate is different from the worker’s salary: it includes visa, insurance, accommodation, transport and PPE. Manpower Supply Rates in the UAE (2026) →

FAQs

Frequently asked questions

Can’t find your answer? Contact our team or WhatsApp us.

Do you supply gas cutters for dismantling and demolition?

Yes. Tell us the steel size and how sections will be lowered, and we will plan the crew with helpers.

Do your gas cutters use oxy-acetylene or oxy-propane?

Both. Cutters work with the fuel gas and equipment your site uses.

Can gas cutters bevel pipe ends for welding?

Yes. Bevelling for fit-up is part of the job.

Do you supply gas cutters for oil field shutdowns?

Yes, together with welders, helpers and scaffolders where needed.

Who provides the cutting equipment and gas?

Usually the client provides gas and torches on site. If you need us to arrange it, ask in your quote request.

Do you supply gas cutters outside Dubai?

Yes, from Jebel Ali to Fujairah and every emirate of the UAE.

Coverage

Where we supply gas cutters

Gas cutters are available for sites in every emirate, on GFTS visas with WPS payroll. Each emirate page covers the areas we work in.

Gas cutter: GFTS worker using a breaker to demolish a blockwork wall during a strip-out
Gas cutter manpower supply for strip-out and dismantling work.
Gas cutter: GFTS worker breaking out a concrete column during dismantling works in the UAE
Gas cutter manpower supply alongside breakers on demolition jobs.

Official sources: Dubai Media Office: MoHRE midday work ban 2026 · MoHRE: Wages Protection System

Looking for work rather than workers? Send your CV to gftsems@gmail.com. This page is for companies hiring supplied manpower.

Business enquiries

Tell us what needs cutting — we’ll send the right crew.

Need gas cutter manpower supply for cutting or dismantling? Gas cutter manpower supply is booked by the day, month or project. Tell us the trade, headcount, location and start date. We’ll come back with a clear, itemised quotation.

WhatsApp